 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AZ942H 12 AMP MINIATURE PC BOARD RELAY FEATURES * * * * * * * * Extremely low cost High switching capacity -- 12 Amps DC coils to 48 VDC Class B insulation for high temperature operation Class F insulation available Meets IEEE 587 6 kV lightning surge UL, CUR file E43203 VDE approved models available, please contact the factory GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Minimum operations 1x107 1 x 105 at 10A 277 VAC Res. 10 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) CONTACTS Arrangement Ratings Form A SPST (1 Form A) SPDT (1 Form C) Resistive load Max. switched power: 196 W or 2770 VA Max. switched current: 12 A Max. switched voltage: 150 VDC* or 300 VAC UL Rating: 10 A at 28 VDC, 100k cycles [1] [2] 10 A at 277 VAC, 100k cycles [1] 10 A at 277 VAC, 25k cycles [2] Max. switched power: 196 W or 1939 VA Max. switched current: 12 A Max. switched voltage: 150 VDC* or 300 VAC UL Rating: 7 A at 28 VDC, 100k cycles [1] [2] 12 A at 125 VAC, 100k cycles [1] 12 A at 125 VAC, 100k cycles N.O. [2] 12 A at 125 VAC, 50k cycles N.C. [2] 7 A at 277 VAC, 100k cycles [1] [2] 4 FLA / 4 LRA at 240VAC 100k cycles, N.O. [2] 2 FLA / 4 LAR at 240 VAC 100k cycles, N.C. [2] [1] Silver cadmium oxide [2] Silver tin oxide *NOTE: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Release Time (typical) Dielectric Strength 3000 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight 100 megohms min. at 20C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage Class B: -40C(-40F) to 100C(212F) Class F: -40C(-40F) to 120C(248F) Class B: -55C(-67F) to 130C(266F) Class F: -55C(-67F) to 155C(311F) 0.062" DA at 10-55Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270C (518F) 5 seconds 80C (176F) 30 seconds 13 g Form C Material Resistance Silver cadmium oxide or silver tin oxide <100 milliohms initially (24 V, 1 A voltage drop method) COIL Power At Pickup Voltage (typical) Max Continuous Dissipation Temperature Rise Temperature 230 mW Class B: 1.7 W at 20C (68F) ambient Class F: 2.2 W at 20C (68F) ambient 25C (45F) at nominal coil voltage Class B: Max. 130C (266F) Class F: Max. 155C (311F) NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice. 5/15/05W AZ942H RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 24 48 Must Operate VDC 2.4 4.0 4.8 7.2 9.6 19.2 38.4 Max Continuous VDC 6.5 11.0 13.0 20.0 26.0 52.0 104.0 Coil Resistance 10% 25 70 100 225 400 1,600 6,200 ORDER NUMBER* Form A (SPST-N.O.) AZ942H-1A-3D AZ942H-1A-5D AZ942H-1A-6D AZ942H-1A-9D AZ942H-1A-12D AZ942H-1A-24D AZ942H-1A-48D Form C (SPDT) AZ942H-1C-3D AZ942H-1C-5D AZ942H-1C-6D AZ942H-1C-9D AZ942H-1C-12D AZ942H-1C-24D AZ942H-1C-48D *For epoxy sealed versions, add suffix "E". For silver tin oxide contacts add suffix "T". To indicate Class F version, add suffix "F". IEEE STANDARD 587-1980 (ANSI/IEEE C62.41-1980) SURGE VOLTAGE WITHSTAND RATING Test 1.2 x 50 usec positive pulse 1.2 X 50 usec negative pulse 0.5 us 100 kHz ring wave Rating 6 kV 6 kV 6 kV Description Contact to coil - 5 pulses Contact to coil - 5 pulses Contact to coil - 5 waves MECHANICAL DATA .87 (22.0) TERMINAL DIMENSIONS Terminal Number 1 2, 3, 4, 5 Dimensions .015 X .040 .020 X .036 PC BOARD LAYOUT .05 5 HOLES (1.3) .64 (16.3) .082 (2.1) WIRING DIAGRAM .016 (0.4) .65 (16.5) 2 3 C L * .472 (12.0) 1 .013 (0.3) .040 (1.0) 5 PLACES .138 (3.5) .078 (2.0) .480 (12.2) 5 Viewed toward terminals 4* Viewed toward terminals *Not used on Form A relay *Not used on Form A relay Dimensions in inches with metric equivalents in parentheses. Tolerance: 0.010" 5/15/05W |
Price & Availability of AZ942H-1A-12D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |